软管泵-路面抛丸机信誉至上

本软管泵可垂直或倾斜使用,占地面积小,蜗壳需埋在工作介质中工作,容易启动,不需引水,旋转方向应从电机尾部看是顺时针方向工作。总机长度备有各种规格,以便使用单位根据用途因地制宜地选用。                                           

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.